[vpsFree.cz: community-list] nginx padá
Jan Pleva
jenik.pleva at gmail.com
Tue Oct 13 17:15:38 CEST 2020
no, nabehne... prave ze nenabehne... pokud tam ten web bezi v mezicase, pak
je dost mozna problem v tom, ze bud tam bezi jiny webserver, nebo
nejaka druha instance nginxu o ketere ten start script nevi. Tak nebo onak,
nginx se nemuze poslouchat na 80/443 protoze uz na tom portu neco jineho
posloucha. At uz nginx, Apache nebo neco jineho.
Jak pise kolega, *netstat -luntp | grep "80\|443"* by melo vnest svetlo
odkud vitr fouka.
S pozdravem
Jan Pleva
út 13. 10. 2020 v 16:03 odesílatel petr.bolf at taborpolana.cz <
petr.bolf at taborpolana.cz> napsal:
> dík
>
>
> Mate mne, že server naběhne, nginx -t je spokojený a chyba se projeví až
> po nějakém čase. Zatím se mi zdá, že jsem měl bordel v jednom
> konfiguráku a jakoby to tam udělal certbot, a nebo se tam něco omylem
> zkopírovalo.
>
>
> Když jsem měl chybu v konfiguraci serveru, většinou se to projevilo už
> při startu, nebo při nginx -t.
>
>
>
> Petr
>
> Dne 13. 10. 20 v 15:31 Vojtěch Oram napsal(a):
> > Ahoj,
> > neběží tim tam třeba ještě Apache? Vypadá to, že Nginx nemůže
> > nastartovat, protože jsou porty 80 a 443 už obsazené. Zkus se kouknout
> > na výstup "netstat -nlp", co tam běží na portu 80 a 443.
> >
> > S přáním pěkného dne
> >
> > Vojtěch "Flaiming" Oram
> > https://vojtechoram.cz
> >
> > Dne 13. 10. 20 v 14:57 petr.bolf at taborpolana.cz napsal(a):
> >> zdravím,
> >>
> >>
> >> nevěděl by někdo s čím může být problém - asi někde v konfiguraci
> >> serverů pro nginx.
> >>
> >> sudo nginx -t
> >> nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
> >> nginx: configuration file /etc/nginx/nginx.conf test is successful
> >>
> >>
> >> sudo systemctl start nginx.service
> >>
> >> sudo systemctl status nginx.service
> >> ● nginx.service - A high performance web server and a reverse proxy
> >> server
> >> Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor
> >> preset: en
> >> Active: active (running) since Tue 2020-10-13 14:49:08 CEST; 6min ago
> >> Docs: man:nginx(8)
> >> Process: 16277 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on;
> >> master_process
> >> Process: 16278 ExecStart=/usr/sbin/nginx -g daemon on;
> >> master_process on; (cod
> >> Main PID: 16279 (nginx)
> >> Memory: 21.0M
> >> CGroup: /system.slice/nginx.service
> >> ├─16279 nginx: master process /usr/sbin/nginx -g daemon
> >> on; master_pr
> >> ├─16280 nginx: worker process
> >> ├─16281 nginx: worker process
> >> ├─16282 nginx: worker process
> >> ├─16283 nginx: worker process
> >> ├─16284 nginx: worker process
> >> ├─16285 nginx: worker process
> >> ├─16286 nginx: worker process
> >> └─16287 nginx: worker process
> >>
> >>
> >> jenže po nějakém čase server spadne.
> >>
> >>
> >> sudo tail -f /var/log/nginx/error.log
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to [::]:443 failed (98:
> >> Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to 0.0.0.0:443 failed
> >> (98: Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to 0.0.0.0:80 failed
> >> (98: Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to [::]:80 failed (98:
> >> Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to [::]:443 failed (98:
> >> Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to 0.0.0.0:443 failed
> >> (98: Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to 0.0.0.0:80 failed
> >> (98: Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: bind() to [::]:80 failed (98:
> >> Address already in use)
> >> 2020/10/13 02:39:01 [emerg] 7506#7506: still could not bind()
> >> 2020/10/13 02:39:04 [alert] 7357#7357: unlink() "/run/nginx.pid"
> >> failed (2: No such file or directory)
> >>
> >>
> >> a když je spadlý tak
> >>
> >>
> >> sudo systemctl status nginx.service
> >> [sudo] password for pruga:
> >> ● nginx.service - A high performance web server and a reverse proxy
> >> server
> >> Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor
> >> preset: en
> >> Active: failed (Result: exit-code) since Tue 2020-10-13 02:39:04
> >> CEST; 11h ag
> >> Docs: man:nginx(8)
> >> Process: 7501 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on;
> >> master_process
> >> Process: 7506 ExecStart=/usr/sbin/nginx -g daemon on;
> >> master_process on; (code
> >>
> >> Oct 13 02:39:03 domogled nginx[7506]: nginx: [emerg] bind() to
> >> 0.0.0.0:80 failed
> >> Oct 13 02:39:03 domogled nginx[7506]: nginx: [emerg] bind() to
> >> [::]:80 failed (9
> >> Oct 13 02:39:03 domogled nginx[7506]: nginx: [emerg] bind() to
> >> [::]:443 failed (
> >> Oct 13 02:39:03 domogled nginx[7506]: nginx: [emerg] bind() to
> >> 0.0.0.0:443 faile
> >> Oct 13 02:39:03 domogled nginx[7506]: nginx: [emerg] bind() to
> >> 0.0.0.0:80 failed
> >> Oct 13 02:39:03 domogled nginx[7506]: nginx: [emerg] bind() to
> >> [::]:80 failed (9
> >> Oct 13 02:39:04 domogled nginx[7506]: nginx: [emerg] still could not
> >> bind()
> >> Oct 13 02:39:04 domogled systemd[1]: nginx.service: Control process
> >> exited, code
> >> Oct 13 02:39:04 domogled systemd[1]: nginx.service: Failed with
> >> result 'exit-cod
> >> Oct 13 02:39:04 domogled systemd[1]: Failed to start A high
> >> performance web serv
> >>
> >>
> >> přičemž
> >>
> >> sudo systemctl start nginx.service
> >>
> >>
> >> ho zase nastartuje a zase chvilu běží.
> >>
> >>
> >> díky
> >>
> >>
> >> Petr Bolf
> >>
> >> _______________________________________________
> >> Community-list mailing list
> >> Community-list at lists.vpsfree.cz
> >> http://lists.vpsfree.cz/listinfo/community-list
> > _______________________________________________
> > Community-list mailing list
> > Community-list at lists.vpsfree.cz
> > http://lists.vpsfree.cz/listinfo/community-list
> _______________________________________________
> Community-list mailing list
> Community-list at lists.vpsfree.cz
> http://lists.vpsfree.cz/listinfo/community-list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vpsfree.cz/pipermail/community-list/attachments/20201013/324b0d5f/attachment.html>
More information about the Community-list
mailing list